|
|
 |
|
Products >>
Magnetic Locators >>
SCHONSTEDT GA-52CX & GA-72CD |
|
|
Schonstedt
GA-52CX &
GA-72CD
|
|
 |
Schonstedt GA-52CX
& GA-72CD - Magnetic / Metered Magnetic Locator with Case
#1
Around the World in Performance and Reliability
Easy to Use
The GA-52Cx and GA-72Cd Locators detect the magnetic field
of iron and steel objects and energized power lines. Both
provide audio detection signals that peak in frequency
when the locator's tip is held directly over the target.
The GA-72Cd has the option of nulling or peaking.
|
|
Quality Is Our Hallmark
Schonstedt's underground magnetic locators have been
setting the standards for reliability and dependability
for over 30 years. They are designed to withstand the
rigors of daily on-site usage and a wide range of
environmental conditions. In fact, the Model GA-52Cx is so
rugged and dependable it's backed by a 7-year warranty and
the Model GA-72Cd is backed by a 5-year warranty.
|
|
|
|
|
Only two Controls
Designed for one-hand operations, the On/Off-Sensitivity
and Volume controls are located on the underside of the
cover on both locators. This provides easy access,
protects the knobs and contributes to their overall
ruggedness and dependability.
The GA-72Cd also has easy-to-read digital and bar graphs
which display signal strength and polarity. Once you have
located a target using the audio signal, the digital
readout and polarity indicators will help you to visually
pinpoint the target and, in some instances, even determine
its orientation.
Signal Strength and Polarity Indications
The GA-72Cd's audio signal and the 3-digit LCD readout
will peak, and the (+) or (-) bar graph will expand to
full scale when its tip is directly over a vertical iron
pipe. One end of a horizontal target will be (+) and the
other will be (-). This difference is very significant
because it helps you to distinguish between vertical and
horizontal pipes.
With the GA-72Cd you can select any one of four
sensitivity settings. The GA-52Cx offers five sensitivity
settings. The GA-72Cd's LCD bar graph shows the selected
gain and the battery status. The GA-72Cd's headset jack
can be connected to your data logger using a standard
stereo audio plug.
Choice of Two Audio Modes
The GA-72Cd is configured initially to provide an audio
signal that is always present (Audio Output switch set to
"B"). If you do not want to hear a signal until the
locator is within the detection range of a target, you can
set the Audio Output Switch to "A".
|
|
GA-52Cx - Features & Specifications
Features:
-
Seven Year Warranty
-
Enhanced target definition
-
Unsurpassed detection range
-
Piezoelectric speaker
-
Clear, sharp, detection signal pinpoints the
target
- Five
individual sensitivity settings
- No
response to aluminum, brass, or copper
- Ease
of operation reduces search time
- With
experience, user can distinguish between small
pieces of scrap iron and actual targets
-
40-hours operation (intermittent usage) on two
economical 9-volt batteries
-
Modular construction
- High
performance components
-
Weights approximately 2 1/2 lbs
-
Weather protected controls
-
Rugged lightweight case
-
Patented HeliFlux® sensors
- Y2K
Compliant
Both
the GA-52Cx and the GA-72Cd are standard with a
custom case designed to withstand the rigors of
field use.
Specifications:
|
Input Power |
Two alkaline 9-volt batteries |
|
Battery Life |
40 hours (intermittent usage) |
|
Output |
Approximately 40 Hz audio tone on speaker.
Tone frequency increases or decreases with
gradient-field intensity. |
|
Weight |
Approximately 2.5lb. (1.13 kg.) |
|
Operating Temp |
-13o to 140oF
(-25o to 60oC) |
|
Overall Length
|
42.3 in. (107.4 cm) |
|
Waterproof Length |
34.5 in. (87.6 cm) |
|
Nominal Sensor Spacing |
20 in. (50.8 cm) |
|
Construction |
Modular, all solid state |
(We reserve the right to change specifications)
Click here to download:
GA-52Cx Instruction Manual
(1.6 MB Document)
|
|
|
|
GA-72Cd - Features & Specifications
Features:
- Five
Year Warranty
-
Digital readout and expanding bar graph displays
signal strength and polarity
- 4
Sensitivity settings: Low, Medium, High, and Extra
High
-
Piezoelectric speaker
-
Analog output for data logger entry
-
60-Hours operational life (intermittent usage) on
2 lithium 9-volt batteries
-
First locator to use Environmentally Friendly and
Safe, lithium batteries. The unit is shipped with
two 9-volt lithium batteries installed, and a
spare set of batteries stored in the case. Lithium
batteries provide twice the life of alkalines, and
have a 10-year shelf life.
-
4-Segment BATT LCD monitors battery charge
-
Lightweight, easy-to-use-design reduces search
time
-
Modular construction; high performance components
-
Patented HeliFlux® sensors
- No
response to aluminum, brass, or copper
- Y2K
compliant
Both
the GA-52Cx and the GA-72Cd are standard with a
custom case designed to withstand the rigors of
field use
Specifications:
|
Output |
|
|
Audio |
|
|
Switch at "A" |
Signal increases or decreases in volume with
gradient-field intensity |
|
Switch at "B" |
Signal increases or decreases in frequency with
gradient-field intensity |
|
Visual |
Digital readout and expanding bar graph indicate
polarity (+ or-) and relative strength of the
magnetic field |
|
Battery Life |
60 Hours (intermittent usage) |
|
Input Power |
Two lithium 9-volt batteries |
|
Battery Check |
4-segment LCD BATT indicator |
|
Weight |
Approximately 2.5 lb. (1.14 kg) |
|
Operating Temp |
-13o to 140oF
(-25o to 60oC) |
|
Overall Length |
34.5 in. (87.6 cm) |
|
Waterproof Length |
21 in. (53.3 cm) |
|
Nominal Sensor Spacing |
14 in. (35.6 cm) |
|
Construction |
Modular, all solid state |
(We reserve the right to change specifications)
Click here to download:
GA-72Cd Instruction Manual
(1.6 MB Document) |
|
|
|
|
|
 |
| |
Home -
Company
-
Products -
Industrial Metal Detectors -
Pipe &
Cable Locators
Magnetic
Locators -
Leak Locators -
Industrial
Rentals -
International Sales -
Contact
Copyright 2007, Global Detection Systems - Website Design & SEO by
DL Web Works |
|
